Includes 2 Octa-Slide color bars with 8 translucent color standards for Chlorine and pH. A 50-page reference manual for entry level lifeguards and service personnel is included with information on water balance, sanitizers, dosage charts and testing. The POOL MGR. series also includes diagrammed instructions and saturation index calculator in a tough, blow-molded carrying case.
A simple color chart kit for measuring Copper from 0.05 to 1.0 ppm. Eight color standards are provided on the chart. Economical and easy-to-use.
The Free Chlorine & pH DipCell Test Kit allows the pool or spa owner to measure Free Chlorine 0.50 to 10 ppm and pH 6.8 to 8.2. The DipCell, 30 Free Chlorine (DPD #1 Rapid) TesTabs®, 30 pH TesTabs®, and instructions are packaged in a hanging/free standing plastic clamshell. The Free Chlorine & pH Test Kit is packed individually or a 12-pack case.
Free Chlorine & pH Test Kit Refill
The Free Chlorine & pH Testab Kit Refill includes 30 each of the Free Chlorine (DPD#1 Rapid) and pH TesTabs® are blister-carded. There are 12 blister-carded units in a case.
The (Salt) Sodium Chloride Test Kit is an easy-to-use drop count titration kit for salt water pools. The salt content of the pool is measured by counting each drop of titrant added to the sample tube. The kit comes in a sturdy, plastic case with two 30 mL salt titrant bottles, one 15 mL chloride reagent bottle, and one clear sample tube with cap.
The Cyanuric Acid (Stabilizer) test kit measures Cyanuric Acid levels at 20, 30, 40, 50, 60, 80 and 100 ppm. The kit includes 50 Cyanuric Acid visual grade TesTabs® tablets that are added to a test tube. Once the tablet disintegrates then the analyst would look down through the test tube and measure the Cyanuric Acid level by the disappearing dot method.
The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.
The test kit uses a color chart that measures Copper and Iron levels at 0.1, 0.3, 0.6 and 1.0 ppm. The test kit is simple to use with just adding 3 drops of Copper reagent to a 5 mL test tube of water then matching the color reaction to the color chart.
The Iron test is measured by adding 5 drops of Iron reagent along with an Iron TesTabs® tablet to a 5 mL test tube of water then match the reacted sample water with the color chart. Included with the kit is an easy to read diagrammed instructions, test tubes, color chart and enough testing reagents to measure 50 tests.
The Alkalinity and Calcium Hardness TesTabs® test kit uses one tablet per test factor which is added to a test tube of water sample to develop a color. Sample water is added performing a back titration until an endpoint color change occurs. The results are read directly from the test tube which measures Alkalinity and Calcium Hardness from 60 to 400 ppm. The kit includes simple to read instructions, 30 TesTabs® tablets, a water sample bottle along with a preprinted test tube with Alkalinity and Calcium Hardness levels.