Standardized pH buffer solutions are used for the calibration of pH meters.
Standardized pH buffer solutions are used for the calibration of pH meters.
Minute amount of color permits immediate visual distinction of different buffer values.
Minute amount of color permits immediate visual distinction of different buffer values.
These Potassium Chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.
| Item Description | Order Code |
|---|---|
| Conductivity TDS Standard, 718 μS/cm 503 ppm, 100mL | 6417-J |
| Conductivity TDS Standard, 718 μS/cm 503 ppm, 500mL | 6417-L |
| Conductivity TDS Standard, 718 μS/cm 503 ppm, 3800mL | 6417-N |
These Potassium Chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.
| Item Description | Order Code |
|---|---|
| Conductivity TDS Standard, 6668 μS/cm 4668 ppm, 100mL | 6418-J |
| Conductivity TDS Standard, 6668 μS/cm 4668 ppm, 500mL | 6418-L |
The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA.
The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.
This kit tests for Total Hardness by using the Direct Reading Titrator Method. All results are as CaCO3. Range/sensitivity is 0-200 ppm/4ppm CaCO3.
This kit tests for nitrite using the dropper pipet method. Range/sensitivity is 1 drop = 50 or 100 ppm NaNO2.