Pools, Spas & Aquatics Archives - Page 27 of 29

Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
Readings are not affected by sample color or turbidity
Automatic self calibration
Extra bold display includes an analog bar graph feature
Memory can store up to 15 readings
Chlorine and pH modes also display sample temperature
Meter identifies which probe is in use and retains calibrations
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
Follows EPA protocol for ISE methods

Insta-TEST^® Copper, pH, and Alkalinity Test Strips measures Copper 0, 0.3, 0.6, 1, 3 ppm, pH 6.2, 6.8, 7.2, 7.6, 8.0, 8.4, and Alkalinity 0, 40, 80, 120, 180, 240 ppm in 10 seconds. There are 25 strips per bottle and packaged in a unique, hinged, waterproof PopTop bottle with desiccant liner that protects the test strips from moisture intrusion.

The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).

The test is based on the reaction of the cationic polyquat with an anionic polyelectrolyte using Toluidine Blue O as the indicator. The color change is blue to purple. Levels are determined using the drop count method. Range and Sensitivity is 1 drop = 1 ppm Polyquat.

The Insta-TEST^® Copper & Iron Test Strip Kit measures Copper levels from 0-3.0 ppm and Iron levels from 0-5.0 ppm. The Copper test strip has been improved with a one-dip formula that offers very distinct colors. The one-dip Insta-TEST^® Iron test strip formula eliminates the need to pre-treat the sample with a reduction tablet prior to measuring Iron with a test strip. The Iron strip makes the testing process simpler with just one dip of the strip into a pool or spa before matching the reaction to a color chart on the bottle. There are 25 strips packaged per bottle.

Includes 2 Octa-Slide color bars with 8 translucent color standards for Chlorine and pH. A 50-page reference manual for entry level lifeguards and service personnel is included with information on water balance, sanitizers, dosage charts and testing. The POOL MGR. series also includes diagrammed instructions and saturation index calculator in a tough, blow-molded carrying case.

Minute amount of color permits immediate visual distinction of different buffer values.

Measures the stabilizer levels from 0, 40, 100, 150, 250, 500 ppm instantly! Each bottle includes 25 test strips packaged in a waterproof PopTop bottle with a molded desiccant liner, which protects the strips from moisture and UV light. This product includes trilingual (English, Spanish, French) instructions.

A simple color chart kit for measuring Copper from 0.05 to 1.0 ppm. Eight color standards are provided on the chart. Economical and easy-to-use.

The following potassium chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.