Industrial Boiler & Cooling Testing Archives - Page 40 of 40

This kit tests for Nitrate-Nitrogen using the LRC Comparator. Range/sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0 ppm NO₃-N.

Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
Readings are not affected by sample color or turbidity
Automatic self calibration
Extra bold display includes an analog bar graph feature
Memory can store up to 15 readings
Chlorine and pH modes also display sample temperature
Meter identifies which probe is in use and retains calibrations
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
Follows EPA protocol for ISE methods

This kit tests for QAC using the Direct Reading Titrator method. Range and sensitivity is 0-1,000 ppm/20 ppm, 0-5,000 ppm/100 ppm with dilution.

A masked bromphenol blue indicator is added to the sample and turns green. Sodium tetraphenylboron is added to complex the QAC and the color changes to red. This method is best suited to higher QAC concentrations.

The Insta-TEST^® 5 Way strips provide fast results for Nitrate, Nitrite, pH, Alkalinity and Total Hardness.

Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio

This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm NO₃-N.

The Insta-TEST^® Low Range Chlorine test strips are a convenient way to test low range levels of Free Chlorine. Ideal for drinking water or pools. Range and sensitivity is 0, 0.5, 1, 3, 5, 10 ppm.

This kit tests for Silica using the Octa-Slide 2 Comparator. Range and sensitivity is 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0, 10.0 ppm or 5, 10, 20, 30, 40, 60, 80, 100 ppm SiO₂.

This DEHA Test Kit tests for DEHA using the Octa-Slide 2 Comparator. Diethylhydroxylamine reacts with ferric iron to form ferrous iron, which is then measured by a standard iron test. Range and sensitivity is 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5 ppm DEHA