The DPD-FAS titration test kit measures Free and Total Chlorine in 0.2 ppm and 0.5 ppm increments. The distinct color change allows for accurate readings even at very low or high chlorine levels. The DipCell Color Comparator displays pH levels from 6.8 to 8.2 for 50 tests. The pH test is measured using liquid reagents.

This kit tests for Total Hardness by using the Direct Reading Titrator Method. All results are as CaCO₃. Range/sensitivity is 0-200 ppm/4ppm CaCO₃.

This kit tests for Sodium Nitrite using the Direct Reading Titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂.

This Dual Range Chlorine Test Kit tests for high and low ranges of chlorine using the Octa-Slide 2 Comparator. Low range: 0.1-1.0 ppm Cl. High range: 1.0-6.0 ppm Cl.

For control of water supplies, cleaning operations, and rinses.

Seven important factors for monitoring incoming water supplies, break, suds and bleach operations; also rinse and sour operations. The pH (alkaline) test uses a LaMotte Octa-Slide 2 Comparator. The alkalinity tests, chlorine bleach and hardness test utilize dropper pipet test methods. Reagents are supplied for 50 tests of each factor.

This kit measures for acidity by using the phenolphthalein endpoint to determine hydrochloric, sulfuric, and phosphoric acids. Range/sensitivity is 1 drop = 0.1 or 1.0% (as the particular acid).

This kit tests for low ranges of Nitrite using the Dropper Bottle method. Range/sensitivity is 1 drop = 50 ppm NaNO₂.

Insta-TEST^® Chlorine Dioxide is a convenient way to test for Chlorine Dioxide levels in sanitized water. Range and sensitivity is 0, 10, 25, 50, 100, 250, 500 ppm.