For control of water supplies, cleaning operations, and rinses.

Seven important factors for monitoring incoming water supplies, break, suds and bleach operations; also rinse and sour operations. The pH (alkaline) test uses a LaMotte Octa-Slide 2 Comparator. The alkalinity tests, chlorine bleach and hardness test utilize dropper pipet test methods. Reagents are supplied for 50 tests of each factor.

 

This kit measures for acidity by using the phenolphthalein endpoint to determine hydrochloric, sulfuric, and phosphoric acids. Range/sensitivity is 1 drop = 0.1 or 1.0% (as the particular acid).

 

This kit tests for Total, Calcium and magnesium hardness by using the Dropper Bottle method. All results are as CaCO3. Range/sensitivity is 1 drop = 10 ppm or 1 gpg CaCO3.

 

This kit tests for low ranges of Nitrite using the Dropper Bottle method. Range/sensitivity is 1 drop = 50 ppm NaNO2.

 

Insta-TEST® Chlorine Dioxide is a convenient way to test for Chlorine Dioxide levels in sanitized water. Range and sensitivity is 0, 10, 25, 50, 100, 250, 500 ppm.

 

This kit tests for Phosphonate using the drop count method. Range: 1 drop = 1.25 ppm HEDP, 1 drop = 1.4 ppm PBTC.

 

Be in control from mash to mug! The BrewLab® Plus test kit for home brewers allows you to evaluate the quality of one of the most crucial ingredients of a successful beer—the water. Results for 8 water quality factors to allow you to calculate whether adjustments are necessary before you begin brewing. The digital pH meter provides additional information that allows you to monitor progress throughout the brewing process. A link to a popular brewing calculator is included.

Test for 8 Essential Factors

 

This Alkalinity test kit provides total alkalinity readings only, using a Direct Reading Titrator. Testing range/sensitivity 0-200 ppm/4 ppm as CaCO3.

 

This kit tests for Total Hardness in water by using the Dropper Bottle Method. All results are as CaCO3. Range/sensitivity is 1 drop = 10, 25, or 50 ppm CaCO3.

 

This peracetic acid test kit tests for peracetic acid and hydrogen peroxide using the dropper bottle method. Range/sensitivity is 1 drop = 50 ppm peroxide and 1 drop = 15 ppm peracetic acid.